AGF S.r.l web site

Generatori Eolici - Southwest Windpower

They are ideal to recharge batteries of boats, recreational vehicles, small remote homes, professional illumination systems, tele-control etc. even in places non subject to strong wind. The series AIR X and AIR X Marine wind generators overwork wind energy to obtain low tension electric energy to accumulate in recharging batteries. Them are supplied ready to install; all you have to do is mount the support pipe and connect the generator to a battery bank; the charging regulator is in solid state with PWM load cycle microprocessor and it is protected inside the generator body. If wind reach dangerous velocity, AIR-X’s circuit electronically slows the blades. These generators are rugged, reliable and silent; they are available even in Air-X Marine version with a particular anticorrosion casing. Easy to install with the EZ TOWERS (different height: 7.2, 9.0, 15.0, 19.5 and 24 metres) and with roof mount kit (supplied on request).

WARRANTY: 3 YEARS.

Technical specifications:
Rotor diameter:	1,15m
Weight	6kg
Mounting flange	48mm ø
Blades material	carbon fibre
Generator material	Aluminium alloy
Start up wind speed	3 m/s
Energy per month	38kWh/month with 5.4 m/s average speed
Voltage	12,24 V.cc.
Max output	400 Watt at 12.5 m/s

The H40 wind generators are designed to operate in a site with medium to high wind speed averages of 5.4 m/s – 19Hm/h and greater. They are ideal to satisfy energy needs of shelters, stand-alone or hybrid telecommunication systems, remote home, cathode protection, telecontrol, water pumping and many other applications. The H40 provides 100kWh per month to your battery banks with an average wind speed of 19Km/h (5.4 m/s).
The side-furling Angle-Governor® protects the turbine in high winds by turning the alternator and blades out of the wind, reducing turbine exposure. The EZ-WIRE charge regulator is separated from generator body and can manage a PV solar generator (mod. EZ-WIRE I mod. Ibrido).
Models for marine applications are available on request. Rugged, reliable and silent; WARRANTY: 2 YEARS.

Technical specifications:
Rotor diameter:	2,1m
Weight	21kg
Alternator	with permanent magnet without brushes
Mounting flange	73mm ø
Blades material	carbon fibre
Generator material	Aluminium alloy
Start up wind speed	3,4 m/s
Energy per month	100kWh/month with 5.4 m/s average speed
Voltage	12,24 V.cc. Aeolian / FV with EZ Wire I 24,36,48 V. c .c. Aeolian with EZ WIRE II
Max output	900 Watt at 12.5 m/s

EZ-WIRE II MULTI-VOLTAGE CHARGE REGULATORS

Rugged metallic case
Individual rectifiers of the three phases
Supplied with heat dissipater in case of excess of current
LED indicators of the regulation of power / switch
Compatible with any programmable inverter

The H80 wind generators with three blades are designed for the user located in low to moderate wind speed averages (up to 5.4 m/s 19km/h). Compared with H40 model, the H80 has bigger blades and a more powerful alternator. It is ideal to satisfy energy needs of shelters, stand-alone or hybrid telecommunication systems, remote home, telecommunications, cathode protection, telecontrol, water pumping and many other applications. The 230V AC version for grid connections is also available on request. The H80 can supply about 200kWh per month to your battery banks with an average wind speed of 19 km/h (5.4 m/s). The side-furling Angle-Governor® protects the turbine in high winds by turning the alternator and blades out of the wind, reducing turbine exposure. The EZ-WIRE charge regulator is separated from generator body and can manage a PV solar generator (mod. EZ-WIRE I mod. Ibrido).
Models for marine applications are available on request. Rugged, reliable and silent; WARRANTY: 2 YEARS.

Technical specifications:
Rotor diameter:	3m
Weight	30kg
Alternator	with permanent magnet without brushes
Mounting flange	73mm ø
Blades material	carbon fibre
Generator material	Aluminium alloy
Start up wind speed	3,1 m/s
Energy per month	200kWh/month with 5.4 m/s average speed
Voltage	12,24 V.cc. Aeolian / FV with EZ Wire I 24,36,48 V. c .c. Aeolian with EZ WIRE II
Max output	1000 Watt at 12.5 m/s


	EZ-WIRE II MULTI-VOLTAGE CHARGE REGULATORS Rugged metallic case Individual rectifiers of the three phases Supplied with heat dissipater in case of excess of current LED indicators of the regulation of power / switch Compatible with any programmable inverter

The 175 Whisper wind generators with 2 blades provide a serious power production for an entire home; they are designed for the user located in low to moderate wind speed averages (up to 5,4 m/s – 19 km/h); they can produce the double of energy compared with H80 model, thanks to bigger blades and more powerful alternator. It is ideal to satisfy energy needs of shelters, stand-alone or hybrid telecommunication systems, remote home, telecommunications, cathode protection, telecontrol, water pumping and many other applications. The 230V AC version for grid connections is also available on request. WHISPER 175 can supply about 500 kWh per month to your battery banks with an average wind speed of 19 km/h or 5.4 m/s. The side-furling Angle-Furl® protects the turbine in high winds by turning the alternator and blades out of the wind, reducing turbine exposure. The EZ-WIRE II charge regulator is separated from generator body and can manage a PV solar generator (mod. EZ-WIRE I Ibrido).
Rugged, reliable and silent; WARRANTY: 2 YEARS.

Technical specifications:
Rotor diameter:	4,5m
Weight	70kg
Alternator	with permanent magnet without brushes
Mounting flange	127mm ø
Blades material	carbon fibre
Generator material	Aluminium alloy
Start up wind speed	3,1 m/s
Energy per month	500kWh/month with 5.4 m/s average speed
Voltage	12,24 V.cc. Aeolian / FV with EZ Wire I 24,36,48 V. c .c. Aeolian with EZ WIRE II
Max output	3200 Watt at 12.5 m/s

PATENTED ANGLE GOVERNOR® SYSTEM

Exclusive to the Whisper, the side-furling Angle-Governor® protects the turbine in high winds by turning the alternator and blades out of the wind, reducing turbine exposure. The Angle-Governor® allows the Whisper to achieve maximum output in any wind.

EZ-WIRE II MULTI-VOLTAGE CHARGE REGULATORS

Rugged metallic case
Individual rectifiers of the three phases
Supplied with heat dissipater in case of excess of current
LED indicators of the regulation of power / switch
Compatible with any programmable inverter

AGF Electronics Srl - Via Mazzini, 09 - 21041 Albizzate VA - Tel. +39 0331 981007 - Fax +39 0331 983105
P.IVA 01812250122 - agf@agfitaly.com